A Signal Segmentation Approach to Identify Incident/Reflected Traveling-Waves for Fault Location in Half-Bridge MMC-HVDC Grids

This article presents a new systematic technique for identifying voltage traveling-waves (TWs) to determine the location of line faults in half-bridge modular multilevel converter-based high-voltage direct-current (HBMMC-HVDC) grids. In this technique, the buffered voltage signal frame around the fault-detection time is first scaled and then segmented via an optimization process. Finally, the incident/reflected TWs arrival times are obtained by executing a simple search algorithm on the reconstructed signal segments’ differences. This article describes how to use this technique in three forms of TW-based fault location schemes, including the single-ended scheme with known TW velocity, the double-ended scheme with known TW velocity, and the double-ended scheme with unknown TW velocity. The application results on a 4-terminal HBMMC-HVDC grid simulated with exact component models show the proposed technique’s high capability and accuracy in all the three TW-based fault-location schemes. According to these results, the average fault-location errors are less than 0.5% for all the schemes. The numerical results also confirm that the proposed technique maintains its excellent performance, even in the face of close to terminal faults with distances down to 4 km, faults with high resistances up to 450 Ω, and noisy signals with signal-to-noise ratios down to 55 dB. Moreover, the comparison results confirm that the proposed approach is more tolerant of measurement noise than the wavelet transform.©2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed

A Petri net model for optimization of inspection and preventive maintenance rates

Degradation of power system components can be reduced through preventative maintenance. In addition, optimizing inspection and preventive maintenance rates is of great importance since too little or an excessive amount of maintenance can have undesirable consequences. Conventional approaches are not applicable to practical and large-scale systems due to their inherent restrictions, such as complexity and computational burden. In this paper, a Petri net (PN) maintenance model is proposed to consider degradation, inspection, and repair processes as well as random and aging-related failures. It has great flexibility since some constraints can be imposed on the maximum number of maintenance actions, or the maintenance can be inhibited at any deterioration state without the need to change the model structure. Another advantage of this model is that it can handle the dependent deterioration among components. All the mentioned aspects are illustrated by applying the model to some circuit breakers (CBs) of the Roy Billinton test system (RBTS). The simulation results reveal that the obtained inspection rates could differ from the conventional methods resulting in lower total costs. It is also demonstrated that the proposed model can be linked with maintenance decision-making and asset management tools.© 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

A novel energy management model among interdependent sections in the smart grids

Technically, residential energy management systems are fundamental sectors in the smart grids for implementing demand response programs in the layer of households for managing energy consumption and reducing energy bills. The paper proposes a novel energy management scheme that takes production and usage into account based on a heuristic searching operation. In addition to modelling the grid, renewable energy sources, batteries, and electric vehicles, various kinds of electrical and thermal devices have been examined, including air conditioners, water heaters, vacuum cleaners etc. A method is developed for solving the objective constraint issue in a smart home in order to reduce energy consumption and determine feasible operation states among the various loads. Moreover, this paper proposes a grey wolf optimization method for solving the issue over a longer simulation period. Various cases were examined to evaluate the effectiveness of this suggested robust optimization algorithm. The outcomes show that the suggested model could not only reduce energy costs significantly but has also shown good performance for energy management purposes.© 2022 The Authors. IET Generation, Transmission & Distribution published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology. This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs License, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.fi=vertaisarvioitu|en=peerReviewed

A Survey on Deep Learning Role in Distribution Automation System : A New Collaborative Learning-to-Learning (L2L) Concept

This paper focuses on a powerful and comprehensive overview of Deep Learning (DL) techniques on Distribution Automation System (DAS) applications to provide a complete viewpoint of modern power systems. DAS is a crucial approach to increasing the reliability, quality, and management of distribution networks. Due to the importance of development and sustainable security of DAS, the use of DL data-driven technology has grown significantly. DL techniques have blossomed rapidly, and have been widely applied in several fields of distribution systems. DL techniques are suitable for dynamic, decision-making, and uncertain environments such as DAS. This survey has provided a comprehensive review of the existing research into DL techniques on DAS applications, including fault detection and classification, load and energy forecasting, demand response, energy market forecasting, cyber security, network reconfiguration, and voltage control. Comparative results based on evaluation criteria are also addressed in this manuscript. According to the discussion and results of studies, the use and development of hybrid methods of DL with other methods to enhance and optimize the configuration of the techniques are highlighted. In all matters, hybrid structures accomplish better than single methods as hybrid approaches hold the benefit of several methods to construct a precise performance. Due to this, a new smart technique called Learning-to-learning (L2L) based DL is proposed that can enhance and improve the efficiency, reliability, and security of DAS. The proposed model follows several stages that link different DL algorithms to solve modern power system problems. To show the effectiveness and merit of the L2L based on the proposed framework, it has been tested on a modified reconfigurable IEEE 32 test system. This method has been implemented on several DAS applications that the results prove the decline of mean square errors by approximately 12% compared to conventional LSTM and GRU methods in terms of prediction fields.©2022 Authors. Published by IEEE. This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. For more information, see https://creativecommons.org/licenses/by-nc-nd/4.0/fi=vertaisarvioitu|en=peerReviewed

IoT-Enabled Operation of Multi Energy Hubs Considering Electric Vehicles and Demand Response

This paper introduces a novel Internet of Thing (IoT) enabled approach for optimizing the operation costs and enhancing the network reliability incorporating the uncertainty effects and energy management in multi-carrier Energy Hub (EH) and integrated energy systems (IES) with renewable resources, Combined Heat and Power (CHP) and Plug-In Hybrid Electric Vehicle (PHEV). In the proposed model, the optimization process of different carriers of Multi Energy Hubs (MEH) energy considers a price-based demand response (DR) program with MEH electrical and thermal demands. During the peak period, energy carrier prices are calculated at high tariffs, and other power hubs can help to reduce hub energy costs. The proposed model can handle the random behavior of renewable sources in a correlated environment and find optimal solution for turbines' communication in EHs. The simulation results show the high performance of the proposed model by considering the dependency between wind turbines in MEH structure, power exchange and heat among the EHs.© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed

Grid-Forming Inverter Control for Power Sharing in Microgrids Based on P/f and Q/V Droop Characteristics

Grid-forming inverters are anticipated to be integrated more into future smart microgrids commencing the function of traditional power generators. The grid-forming inverter can generate a reference frequency and voltage itself without assistance from the main grid. This paper comprehensively investigates grid-forming inverter modelling and control methodology. A decentralized method employing an active power versus frequency P − f droop and a reactive power versus voltage Q − V droop is exploited to drive the operation of the grid-forming inverter. This decentralized method ensures balancing the supply and demand beside the power-sharing task between two or more inverters. The performance of the grid-forming inverter is examined by monitoring the frequency and RMS voltage of the inverter bus for three different periods of a varying PQ load. In addition, the performance of the resultant droop is compared with the assumed droop to validate the effectiveness of the proposed method. Finally, two grid-forming inverters equipped with the same droop characteristics are connected to a single load to observe the power-sharing concept among them. All simulations are implemented and executed using Matlab/Simulink version R2014b.© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)fi=vertaisarvioitu|en=peerReviewed

Development of the equivalent Great Britain 36-zone power system for frequency control studies

This paper presents a dynamic model of the equivalent Great Britain (GB) 36-zone power system, which can be used for reliable and realistic assessment of emerging load frequency control mechanisms. Flexible architecture of the presented dynamic test system permits a broad range of security of supply and small-signal stability studies for design of future power grids. It can be particularly useful for academic research, but also for undertaking feasibility studies in power industries. The proposed dynamic test system, which is obtained through network reduction of the original full-scale GB transmission power system developed by National Grid Electricity System Operator (NGESO) Company, provides detailed information about the GB power system. In this regard, the required data and modelling approaches to develop the 36-zone system are provided in detail. The presented dynamic test system represents the system topology, impedance characteristics and electromechanical oscillations of the original GB power system however, it is not an exact equivalent of the master GB system. Illustrative dynamic models of the key system components, including synchronous generators, automatic voltage regulators, power system stabilizers, hydro and steam turbines models along with speed governing systems are presented. Dynamic behavior of 36-zone test system in response to infeed loss contingencies is investigated. Particularly, the impact of changes in the system inertia on the system electromechanical modes is examined using the modal analysis approach. In this context, the mode shape concept is employed to determine dominant generators and contribution of different zones in the low frequency oscillations. Moreover, time-domain simulations are undertaken to validate the modal analysis results. Additionally, the condition of different zones from the viewpoint of frequency nadir and maximum rate of change of frequency for various contingencies and extreme cases are examined.© 2023 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Harmonic Signature-Based One-Class Classifier for Islanding Detection in Microgrids

This article presents a new passive islanding detection technique in MGs that uses locally measured voltage signals at the PoC of DERs. The proposed method distinguishes islanding events from normal/non-islanding conditions by utilizing superimposed harmonic spectra extracted through a full-cycle discrete Fourier transform. Our solution utilizes a machine-learning-based one-class classifier to define and adjust thresholds for full harmonic spectra. Unlike other methods, our approach does not require data synchronization or communication infrastructure, nor does it suffer from common errors that often arise in current transformers. Moreover, our design is compatible with distributed and decentralized control strategies, as it relies solely on local voltage measurements at the PoC. Another advantage of this method is its low sampling frequency requirement, in the range of 1 kHz, making it cost-effective and implementable in most existing systems. In a comprehensive evaluation of a typical MG test system that included synchronous and inverter-based DERs, the proposed scheme demonstrated exceptional performance. Specifically, the scheme was able to detect 99.06% of different islanding events within the training range, with a detection time of just 10 to 21 ms. Additionally, the scheme remained 100% stable during various normal conditions, short-circuit faults, load changes, voltage changes, capacitor switching, and frequency changes.©2023 Authors. Published by IEEE. This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. For more information, see https://creativecommons.org/licenses/by-nc-nd/4.0/fi=vertaisarvioitu|en=peerReviewed

A novel comprehensive energy management model for multi-microgrids considering ancillary services

This article proposes a novel comprehensive multi-layer power management system (PMS) along with its smart distribution network (SDN) constraints as bi-level optimization to address the participation of multi-microgrids (MMGs) in day-ahead energy and ancillary services markets. In the first layer of the proposed model, optimal programming of MMG-connected SDN is considered, in which Microgrids (MGs) participation in the markets is performed to bidirectionally coordinate sources and active loads along with the operator of MGs. In the second layer, the bidirectional coordination of operators of MGs and SDN, that is PMS, is executed in which energy loss, voltage security, and expected energy not-supplied (EENS) are minimized as weighted sum functions. The problem of the difference between costs and revenues of MGs in markets is minimized subject to constraints of linearized AC-power flow, reliability, security, and flexibility of the MGs. To obtain a single-level model, the Karush–Kuhn–Tucker method is applied, and a hybrid stochastic-robust programming is implemented to model uncertainties associated with the load, renewable power, energy price, mobile storage energy demand, and network equipment accessibility. The contributions of this paper include the simultaneous modelling of several economic indicators, multi-layer energy management modelling, and stochastic mixed modelling of uncertainties. The efficiency of this method is validated by simultaneously evaluating the optimum condition of technical and economic indices of several SDNs and MGs. Flexibility of 0.022 MW is obtained for the proposed scheme, which is close to zero (100% flexibility). The voltage security index is increased to 22 by the mentioned scheme, which is close to its normal value, that is, 24. The voltage deviation is below 0.07 p.u. Energy losses are reduced by about 30% compared with that in power flow studies, and the EENS reaches roughly 3 MWh, that is, close to zero (100% reliability).© 2022 The Authors. IET Generation, Transmission & Distribution published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology. This is an open access article under the terms of the Creative Commons Attribution-NonCommercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.fi=vertaisarvioitu|en=peerReviewed

A Framework of Electricity Market based on Two-Layer Stochastic Power Management for Microgrids

This article develops a novel multi-microgrids (MMGs) participation framework in the day-ahead energy and ancillary services, i.e. services of reactive power and reserve regulation, markets incorporating the smart distribution network (SDN) objectives based on two-layer power management system (PMS). A bi-level optimization structure is introduced wherein the upper level models optimal scheduling of SDN in the presence of MMGs while considering the bilateral coordination between microgrids (MGs) and SDN’s operators, i.e. second layer’s PMS. This layer is responsible for minimizing energy loss, expected energy not-supplied, and voltage security as the sum of weighted functions. In addition, the proposed problem is subject to linearized AC optimal power flow (LAC-OPF), reliability and security constraints to make it more practical. Lower level addresses participation of MGs in the competitive market based on bilateral coordination among sources, active loads and MGs’ operator (first layer’s PMS). The problem formulation then tries to minimize the difference between MGs’ cost and revenue in markets while satisfying constraints of LAC-OPF equations, reliability, security, and flexibility of the MGs. Karush–Kuhn–Tucker method is exploited to achieve a single-level model. Moreover, a stochastic programming model is introduced to handle the uncertainties of load, renewable power, energy price, the energy demand of mobile storage, and availability of network equipment. The simulation results confirm the capabilities of the suggested stochastic two-layer scheme in simultaneous evaluation of the optimal status of different technical and economic indices of the SDN and© 2022 Authors. Published by IEEE. This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/fi=vertaisarvioitu|en=peerReviewed